Products
Aluminium Profiles
Aluminium Profiles
Slot profile accessories
Slot profile accessories
Laser cut plates, Semi finished products, Tube systems, Cable conduit
Laser cut plates, Semi finished products, Tube systems, Cable conduit
Mechanical Basics
Mechanical Basics
Dynamic M
Dynamic M
Dynamic E
Dynamic E
Dynamic T
Dynamic T
Dynamic PN
Dynamic PN
Workshop supplies Consumables
Workshop supplies Consumables
Solar
Solar
DIY - Kits Accesories/Sim Racing
DIY - Kits Accesories/Sim Racing

Precision shaft 10 mm h8 - aluminium - hard anodised

Product no.: 6386

w/o taxes:
w/ taxes: 7,90 £
   
With this cutting procedure, you configure your own bar. Less work for us means price benefit for you.

x
Shipping time: 3-6 business days Ex Works
Estimated stock:

Please add some cuts to your cutlist

Add new cut:
mm 50mm-1980mm

Cut list:

Residual: mm (Supplied) (Not supplied)
With this cutting type, you chose a standard length that we have precut in our shelfs. Not only do you have a better price than choosing a cut piece, you also get the benefit of a better delivery time.

x
Shipping time: 3-6 business days Ex Works
Estimated stock:
This is our cheapest cutting procedure so far. It's predefined packs of profile. As with the standard pieces, you don't only have the benefit of the better price. You also have a better delivery time.

x
Shipping time: 3-6 business days Ex Works
Estimated stock:
Products description

With a weight of only 0.218 kg/m, this precision shaft made of aluminium is particularly light and easy to install. The surface is hard anodised and is therefore particularly resistant to environmental influences. In addition, the precision shaft offers every user low wear of the plain bearings, which can also be ordered from us. The material is also very corrosion-resistant, so it can be used outdoors without any problems. The shaft is delivered sawn to length. The tolerance is +/- 0.5 mm.

Overview of precision shaft aluminium Ø10mm:



Diameter 10 mm
Weight: 0.218 kg/m
Roughness Ra = 0.3 µm
Roundness: EN 754-3 (5 µm)
Straightness: EN 754-3
Hardness: 75 HB
Surface: hard anodised
Surface hardness: 450-550 HV
Tolerance: h8
Delivery: Shaft is sawn to length (tolerance: +/- 0.5 mm)
Material: aluminium